If electro-magnetic fields or static charge occur, or if the power supply is unstable
major deviations on the display (incorrect weighing results) are possible. In that case,
the location must be changed.
6.2 Placing
The balance must be installed in a way that the weighing plate is exactly in horizontal
position.
6.2.1 Unpacking
Carefully remove the balance from the packaging, remove plastic cover and setup
balance at the intended workstation.
6.2.2 Scope of delivery
Serial accessories:
• Platform (stainless steel weighing plate) and display unit
• Mains power supply
• Wall mounting (incl. fastening screws)
• Operating Manual
6.2.3 Assembly instructions for use of wall mounting
10
EOB_M-BA-e-0710