Optionala; Special Tools Required; Installationc; Minimum System - Garmin Apollo CNX80 Installation Manual

Installation Procedures
2.3.2 O
PTIONAL
For a list of optional accessories that are available but not supplied with the CNX80, refer to Appendix F.
2.4 S T
PECIAL OOLS
Some of the connectors use crimp contacts. The tables below identify crimp tools required to ensure
consistent, reliable crimp contact connections for the rear D-sub connectors. The tables define one source
for the crimp tool. Alternate equivalent tools may be used.
Description
Insertion/Extraction tool CIET-22D
Crimp tool
Positioner
Description
Insertion/Extraction tool CIET-
20HD
Crimp tool
Positioner
Below is the contact for ITT/Cannon crimp tools:
ITT Cannon
1851 E. Deere Ave
Santa Ana, CA 92705-6500
2.5 I
NSTALLATION
2.5.1 M
INIMUM
2.5.1.1 VFR Installation
The minimum CNX80 installation requires the following items for a VFR Installation:
•
CNX80 GPS/WAAS/Nav/Com (installed in the aircraft manufacturer approved location)
•
GPS antenna, Nav antenna and Com antenna.
2-2
A N
CCESSORIES OT
R
EQUIRED
Table 2-1 - Crimp Tool for P/N 162-0082
ITT/Cannon P/N
271-7048-000
995-0001-584
N/A
Table 2-2 - Crimp Tool for P/N 245-0027
ITT/Cannon P/N
980-200-426
995-0001-584
995-0001-604
Phone (714) 261-5300
FAX (714) 575-8324
C
ONSIDERATIONS
S C
YSTEM ONFIGURATION
560-0982-00 Rev D
S
UPPLIED
Military number
M81969/14-01
M22520/2-01
M22520/2-09
Military number
M81969/39-01
M22520/2-01
M22520/2-08
Apollo CNX80 Installation Manual