Symbol PDT 8100 Series Product Reference Manual page 236

PDT 8100 Series Product Reference Guide for Pocket PC 2002
7. The following screen displays:
Partition Name reflects the selection made on the Main Menu, and "Baud Rate
XXX,XXX" displays the selection chosen from the baud rate menu.
This screen continues to display until the first character of the image to be
downloaded is received from the host. While this screen is displayed, pressing the
Action button returns IPL to the Main Menu screen.
8. Insert the terminal in a cradle, or connect it to a host PC with a serial cable.
9. Return to the host PC, and select the OK button on the Load Terminal dialog box.
10. As soon as the first character of data is received, IPL displays the receiving screen:
Note: If the Pre-erase Attribute bit is set on the partition being downloaded,
the message "Pre-Erasing Flash" also appears.
This screen indicates that the area selected in the Main Menu screen is currently
downloading, and displays until an entire image is received, or until an error is
detected. As more data is received, the Receiving Screen is updated to reflect the
current status.
To process the data, IPL must receive, erase, and write the entire image. With the
exception of the disk images, IPL receives the entire image before starting the
12-16
IPL VER X.XX
Partition Name
Waiting for Data
at Baud Rate XXX,XXX
Press Action to
return to Main Menu
IPL VER X.XX
Partition Name
Downloading Data
Processing XXXXX KB
of YYYYY KB image