Symbol PDT 8100 Series Product Reference Manual page 141

12. On the Dialing Locations tab, specify your current location and phone settings
(most phone lines are tone). These settings apply to all connections you create.
13. Tap Dialing Patterns and enter dial patterns appropriate for your phone system. For
example, if you dial '9' before calling a local number, the pattern is '9,G'.
14. Tap OK until you exit the Connections Settings.
To start the connection, use one of the following programs and the terminal will connect
automatically:
• Send and receive e-mail messages using Inbox. You first must provide the
information it needs to communicate with the e-mail server. For instructions, see
Connecting Directly to an E-mail Server
• Visit Web and WAP pages using Pocket Internet Explorer. For more information,
see Chapter 7, Pocket Internet
Figure 8-2. Dialing Locations Tab
Explorer.
on page 8-9.
Connections
8-5