PDT 8100 Series Product Reference Guide for Pocket PC 2002
Setting Time and Date
The Time and Date screen does not appear after setting the time zone. Use the clock
control panel applet to set the time and date after a cold boot.
Setting Up Your Terminal
Refer to the following chapters for setting up your terminal:
•
For customizing the settings on your PDT 8100, see
PDT
8100.
•
To set up ActiveSync to synchronize your terminal with your desktop computer, see
Chapter 4,
Communications.
•
To set up connections with a network, ISP, or e-mail server, see
Connections.
•
To configure your PDT 814X for Spectrum24, see
Configuration.
•
To configure your PDT 813X for WWAN support, see
Area Network
1-22
Figure 1-21. Setting Time and Date
Configuration.
Chapter 3, Customizing Your
Chapter 8,
Chapter 9, Spectrum24 Network
Chapter 10, Wireless Wide