Sample Network Parameter Registry File - Symbol PDT 8100 Series Product Reference Manual

• The registry file contains the GPRS parameters for a particular network provider.
The entries in this file are read during cold boot and placed with the active registry
settings.
• When PDP context is established, the virtual GPRS driver reads the Active registry
entries.
• The parameter setting utility allows you to view and modify the GPRS network
parameter settings. When modifying the settings you may apply the new settings
to the active parameters settings only, or also to the registry file. If you choose to
affect the active parameters only, the new parameters are used for all subsequent
PDP contexts until a cold boot occurs.
A default registry file is included on the terminal in the platform directory. You may create
and install a registry file for your specific network, or edit the existing registry settings using
the GIU utility. The GUI utility is included in the GsmDemo.

Sample Network Parameter Registry File

The following sample provides 3 contexts, with one of them the active context.
; --------------------------------------------------------------------
; GPRS Network Specific Parameters
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Seriald3]
"CurrentContext"=dword:1
"Version"="1.0"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Seriald3\Context1]
;
; 1st of 3 selectable Contexts
;
"ContextID"=dword:1
"ContextName"="VoiceStream"
"PDPType"="IP"
"APN"="internet3.voicestream.com"
"PDPAddress"=""
"DataCompression"=dword:0
"HDRCompression"=dword:0
"QosMinPrecedence"=dword:0
"QosMinDelay"=dword:0
"QosMinReliability"=dword:3
Wireless Wide Area Network Configuration
10-21