On the toolbar, choose
3. Select the item to build. If you select to build an application, specify the application.
4. Select ASCII format for your hex image, or Compression, which reduces the size
of most hex images in order to speed downloading. Click OK .
5. TCM performs a check. If the script is has no errors, TCM proceeds with the build.
If the Build Fails
If the build fails, TCM displays a message indicating which file(s) are missing.
If the total amount of flash required by the script exceeds the image size, a TCM error
results. To correct this, reduce the number of files in the volume, or make the disk non-
bootable. Refer to
the image size appropriately.
Defining Script Properties
. The Configure Build window appears.
on page 12-6 for more information on setting
Configuring the Terminal
12-11