Symbol PDT 8100 Series Product Reference Manual page 210

PDT 8100 Series Product Reference Guide for Pocket PC 2002
4. Set the area code to match the area code entered earlier. Tap Dialing
Patterns.
5. On the Dialing Patterns screen, edit the patterns as shown above, deleting the "9,"
from each location.
6. Tap OK until you return to the Connections screen, and select the Connections tab.
Tap Connect.
7. On the username/password screen that appears, just tap OK. There is no
username or password for a GPRS connection. The terminal attempts connection.
Note: For the GPRS connection to work, first set up the network-specific
PDP Context and Quality of Service parameters using the GSM
Demo. See
network-specific parameter values from your network provider.
10-28
Figure 10-20. Dialing Patterns Screen
Appendix C, GSM Demo Program. You can obtain the