Blacklist - Yeastar Technology MyPBX SOHO User Manual

MyPBX SOHO User Manual

3.4.6 Blacklist

Blacklist is used to block an incoming/outgoing call. If the number of
incoming/outgoing call is registered in the number blacklist, the caller will hear
the following prompt: "The number you have dialed is not in service. Please
check the number and try again". The system will then disconnect the call.
Figure 3.4.6
3.4.6.1 Create Blacklist
Click 'New Blacklist' to create a new number blacklist.
Figure 3.4.6.1
·Blacklist number
Enter the number you would like to block.
·Type
The number blocked for incoming or outgoing calls or both.
www.yeastar.com Page 55