Functions Of The Buttons - Newland BS8050-3V Piranha User Manual

Functions of the Buttons

*Press the button to scan barcode when the scanner is on.
*Hold down the button for 3 seconds to power it on when the scanner is off.
*Press the button to remove the corresponding data from the USB storage area of FLASH
memory in the USB mode before scanning the barcode to be deleted.
*Hold down the button for 7 seconds to reset it when the scanner is on.
*Press the button to turn on the HID keyboard of the connected iOS device in the Wireless
mode.
*Hold down the button for 5 seconds to unpair paired Bluetooth device from the scanner in the
Wireless mode, to make the scanner discoverable by other Bluetooth device.
*Hold down the button for 3 seconds to start data transmission via USB in the USB mode
(Make sure that the scanner is connected to PC first.)
*Hold down the two buttons at the same time for 3 seconds to toggle between the Wireless
mode and USB mode when the scanner is on.
*Hold down the two buttons at the same time for 7 seconds to upgrade the firmware via USB
after clicking the "Start" button of the firmware upgrade utility on PC that the scanner is
connected to.
*Press the two buttons at the same time to check the battery level with the Charging/Battery
LED when the scanner is on.
Scan/Power Button
Delete/Reset Button
Function Button
Scan/Power Button + Function Button
Delete/Reset Button + Function Button
Scan/Power Button + Delete/Reset Button
4