Freefly M?VI Controller User Manual page 11

MōVI CONTROLLER RECEIVER INSTALLATION: M10
1
2
1. Remove the Spektrum 3. Plug the other end of the
Receiever and 3-pin cable
(if applicable).
2. Plug shorter 5-pin cable
into MōVI Data port on
the Gimbal Controller.
MōVI CONTROLLER RECEIVER INSTALLATION: M5 / M15
1
1. Remove the Strain Relief 2. Remove the Spektrum
cover from the Gimbal
Controller.
3. Plug longer 5-pin cable
P11
4. Remove the adhesive
5-pin cable into the MōVI backing from the receiver.
Data port on the receiver.
2
3
4. Route the 5-pin cable
Receiver and 3-pin cable with the other wires
(if applicable). through the Strain Relief
track.
into MōVI Data port on 5. Replace the Strain Relief
the Gimbal Controller. cover.
5. Attach the Receiver
to the Gimbal Controller
shown.
6. Plug the other end of the 8. Attach the Receiver
5-pin cable into the MōVI
Data port on the Receiver.
7. Remove adhesive backing
from the Receiver.
to the Gimbal Controller
shown.