Using A Headset - Aastra 9143i User Manual

Using a Headset

The 9143i accepts headsets through the modular RJ9 jack on the back of the phone. Contact your telephone equipment
retailer or distributor to purchase a compatible headset.
Note:
Customers should read and observe all safety recommendations contained in headset operating guides when using
any headset.
Advanced Volume Controls for the Headset Mic
On the 9143i, there are 3 options for the headset microphone volume. For more information about the headset micro-
phone, see "Headset Mic Volume"
IP Phone UI
To change the volume:
1. Press to enter the Options list.
Options
Select Preferences and press 4.
2.
Use 2 to scroll down to Set Audio and press 4 to select.
3.
Press 2 to scroll down to Headset/Mic Volume and press 4 to select.
4.
Use 2 to scroll down the list and press 4 to select your desired volume.
5.
Press 4 to save changes and 3 to exit.
6.
If you do not wish to save changes, press 3 to return to the previous screen.
7.
Note:
By default, the volume for the headset microphone is set to medium.
Making and Receiving Calls Using a Headset
IP Phone UI
1. Ensure that you have selected a headset audio mode by accessing the Options list (under option Preferences->Set
Audio->Audio Mode on the IP Phone).
2. Plug the headset into the jack.
3. Press the key to obtain a dial tone or to answer an incoming call. Depending on the audio mode selected
from the options menu, a dial tone or an incoming call is received on either the headset or the handsfree speakerphone.
4. Press the key to end the call.
41-001383-00 REV01 – 06.2013
on page 23.
Making Calls
83