Aastra 9143i User Manual page 159

How do I change my user password?
You can change the user password from the IP phone UI or the Aastra Web UI.
IP Phone UI
1. Press on the phone to enter the Options List.
Options
2. Select Password and press Enter.
3. Enter the current user password and press Done.
4. Enter the new user password and press Done.
5. Re-enter the new user password and press Done.
A message, "Password Changed" displays on the screen.
Aastra Web UI
1. Click on Operation->User Password.
2. In the "Current Password" field, enter the current user password.
Note:
By default, the user name is "user" (all lowercase) and the password field is left blank. If you have forgotten your pass-
word, contact your System Administrator for assistance.
3. In the "New Password" field, enter the new user password.
4. In the "Password Confirm" field, enter the new user password again.
5. Click Save Settings.
For information on how to access the Aastra Web UI, go to the section
Why does my phone display "Bad Encrypted Config"?
The IP phone displays "Bad Encrypted Config" because encrypted configuration files are enabled but the decryption proc-
ess has failed.
Report this error to your System Administrator.
41-001383-00 REV01 – 06.2013
Troubleshooting Solutions
"Using the Aastra Web UI" on page 12.
153