Aastra 9143i User Manual page 98

Handling Calls
5. Enter the phone number of Party 3.
Note:
Users are able to edit the destination number ("Backspace" softkey is provided and navigation key is functional to
move the cursor to the desired location).
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the conference.
7. Press the Conf key again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and Party 3 are all
connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the Drop key.
Using Local Conferencing in Live Dial Mode
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
speakerphone key. A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
4. Press the Conf key. You should hear a dial tone before dialing begins.
5. Enter the phone number of Party 3.
Note:
Users are not able to edit the destination number as the phone will either match the inputted number to a dial plan
or wait for the set digit timeout.
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the conference.
7. Press the Conf key again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and Party 3 are all
connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the Drop key.
Note:
You can use 2 and 5 to scroll through and see the numbers and names (if available) of the parties in the conference call.
When a name is displayed, pressing 4 drops the displayed party from the call.
Joining Two Active Calls in a Single Conference
IP Phone UI
1. Begin with active calls on two different lines (for example, Line 1 and Line 2 have active calls).
2. Press the Line key for which you want to conference the two calls together (for example, Line 1).
3. Press the Conf key.
4. Press the Line key that has the second active call (for example, Line 2).
5. Press the Conf key. The two active calls link into a conference call on Line 1.
Note:
You can use 2 and 5 to scroll through and see the numbers and names (if available) of the parties in the conference call.
When a name is displayed, pressing 4 drops the displayed party from the call.
92
2
=Dial
41-001383-00 REV01 – 06.2013