Aastra 9143i User Manual page 120

Hide thumbs Also See for 9143i:
Table of Contents

Advertisement

Managing Calls
DND in Custom Mode
1.
Press the DND key on the phone. The screen displays a list of the accounts on the phone and allows you to enable/dis-
able a specific account or all accounts.
2.
Use the UP and DOWN arrow keys to scroll through the accounts.
In the above example, Screenname1 and 3 have DND ON as indicated by a check mark (
off as indicated by an X. Items 4 and 5 allow you to disable or enable DND on all accounts, respectively.
3.
Use the CHANGE key to enable or disable DND for a specific account.
4.
Use the SET key to enable/disable DND for all accounts.
5.
After making the change, press DONE and then Confirm (#) to save the change. Pressing Cancel (0) cancels the
attempted change. The following screen displays after pressing a DONE key:
Call Forward Account-Based Configuration
Call Forward (CFWD) on the IP phone allows incoming calls to be forwarded to another destination.
On the 9143i, you can set Call Forward (CFWD) on the phone-side for a specific account or for all accounts on the phone.
You can set three modes for CFWD using the Aastra Web UI at the path, Basic Settings->Preferences->General->Call For-
ward Key Mode:
Account (default)
Phone
Custom
CFWD performs according to the mode you set.
You can configure CFWD using the Aastra Web UI at the path, Basic Settings->Account Configuration, OR you can con-
figure CFWD using the IP Phone UI at the path, Options->Call Forward.
Using the Aastra Web UI at the path, Operation->Programmable Keys, you can also configure a CFWD key on the phone
to use as a shortcut for accessing the CFWD menu on the phone.
The following describes the behavior for each CFWD mode.
Account - (default) The account mode allows you to configure CFWD on a per account basis. Pressing a configured
CFWD key applies to the account in focus.
Phone - The Phone mode allows you to set the same CFWD configuration for all accounts (All, Busy, and/or No
Answer). When you configure the initial account, the phone applies the configuration to all other accounts. (In the
Aastra Web UI, only the account you configured is enabled. All other accounts are grayed out but set to the same con-
figuration.) Using the Aastra Web UI, if you make changes to that initial account, the changes apply to all accounts on
the phone.
114
DND
1. Screenname1
Change
Done
DND
4. All Off
Done
DND
X
2. Screenname2
Change
Done
DND
5. All On
Done
DND
3. Screenname3
Done
Change
Apply Changes?
0 Cancel
# Confirm
Set
Set
). Screenname2 has DND
41-001383-00 REV01 – 06.2013

Advertisement

Table of Contents
loading

Table of Contents