Barco NGS-D200 User Manual page 44

N
OTE: You can choose which audio input (Mic in
more information, see "Audio Mixer Configuration" on page 51
N
OTE: Reverse (bidirectional) Audio must be enabled on both the encoder and decoder through the
Streaming Configuration Menu.
N
OTE: When you have finished making changes, click "Apply" at the bottom of the page. Click "Save Settings" to
permanently save your changes to the device.
8.2.11.2 Connect the Encoder to the Decoder
From the Connection Manager main page, select the entry of the server (encoder) you would like to connect your
l
decoder to. You can also use the Connection Manager to break any existing connections between the decoder and
the encoder by clicking "Disconnect."
N
OTE: You can get real-time connection information about the connection from the Streaming Statistics section of
the page. For more information, see "Streaming Statistics" on page 27
T
IP: See Appendix II
K5903085
for instructions on making connections between units.
or Line In ) will be used for reverse audio. For
Chapter 8: Streaming
36