Streaming Settings - Barco NGS-D200 User Manual

Remote LUT: Displays the name field of the LUT used to process video on the V2D encoder
l
Display LUT: The name field of the LUT the decoder is using to override the Remote LUT if Override is enabled
l
N
OTE: The 'Display LUT' field will show "????" if decoder override is disabled.
Current Bytes: Displays the total amount of bytes the decoder is currently using to decode
l
Genlock Status: Indicates if a stereo video signal is detected
l
Video Bytes: Displays the number of video bytes the decoder has so far received from the connected encoder
l
Video Packets: Displays the total number of UDP video packets so far received from the connected encoder
l
Video Lost: Displays the number of video packets lost so far from the connected encoder
l
Video Order: Displays the number of out of order video packets received so far from the connected encoder
l
Video Dropped: Displays the number of video packets dropped so far from the connected encoder
l
Video Frames: Displays the number of video frames so far processed by the decoder
l
Video Slices: Displays the number of video slices so far processed by the decoder
l
Audio Bytes: Displays the number of audio bytes the decoder has so far received from the connected encoder
l
Audio Packets: Displays the total number of UDP audio packets so far received from the connected encoder
l
Audio Lost: Displays the number of audio packets lost so far from the connected encoder
l
Audio Order: Displays the number of out of order audio packets received so far from the connected encoder
l
Rev Audio Bytes: Displays the number of reverse audio bytes the decoder has so far received from the connected
l
encoder
Audio Dropped: Displays the number of audio packets dropped so far from the connected encoder
l
Queue Drops: Displays the number of queued packets dropped so far from the connected encoder
l
Video Output: Indicates if the decoder is outputting video
l

8.2 Streaming Settings

8.2.1 Connection Profile
The Connection Profile defines the quality and encoding parameters of the device.
W
ARNING: When you use a Connection Profile, any decoder on your network will be able to connect to the
encoder. If you would like to restrict access to the encoder, make sure to enable and configure the Authorization
Table option. For more information, see "Authorization Table" on page 33
K5903085
Chapter 8: Streaming
28