Barco NGS-D200 User Manual page 55

Chapter 11: Video
Table 11-3: Default/Valid LUT Parameters
Field
Name
LUT ID.
Stereo?
Horiz. Resolution
Vert. Resolution
Refresh Rate
Pixel Clock Rate
Horiz. Front Porch
Vert. Front Porch
Horiz. Back Porch
Vert. Back Porch
Horiz. Sync
Vert. Sync
Sampling Phase
Vert. Margin
Horiz. Position
Vert. Position
Coarse Noise
Fine Noise
Color Space
Charge Pump Curr
Red/Green/Blue Gain
Red/Green/Blue Offset 64
Name: Name the LUT for future identification
l
LUT ID: Designates a unique ID number for the new LUT. The system will automatically suggest a unique number
l
for you
Stereo?: Enables stereo video for the LUT entry
l
Horiz. Resolution: Specify the horizontal resolution of the video (e.g.
l
Vert. Resolution: Specify the vertical resolution of the video (e.g.
l
Refresh Rate: Specify the vertical refresh rate of the video
l
N
OTE: See your video adaptor's documentation to obtain the proper horizontal and vertical timing
parameters.
Pixel Clock Rate: Enter the pixel clock of the video
l
47
Default Valid Entries
"Default Entry" N/A
N/A 1-169
No Yes, No
1280 0-size of monitor (pixels)
1024 0-size of monitor (pixels)
60.0 1-500 (Hz)
100.0 20-330 (MHz)
40 0-1000 (pixels)
40 0-1000 (lines)
40 0-1000 (pixels)
40 0-1000 (lines)
40 0-1000 (pixels)
40 0-1000 (lines)
0 -16-15
0 0-3
0 -135-375 (pixels)
0 -25-50 (pixels)
10 1-256
16 1-2048
RGB RGB, YPrPb
Auto Auto, 50, 100, 150, 250, 350, 500, 750, 1500 (µA)
128 0-255
0-127
)
1024
)
768
NGS-D200 User Guide