Chapter 12: Audio; Audio Mixer Configuration - Barco NGS-D200 User Manual

Chapter 12: Audio

Chapter 12: Audio
The following topics are covered in this chapter:

12.1 Audio Mixer Configuration

12.1 Audio Mixer Configuration
The Audio Mixer allows you to adjust the volume of local audio or reverse audio coming from the decoder.
Local Audio: Enables you to change the volume of the local audio source (Line or Mic)
l
Remote Audio: Enables you to change the volume of the remote source
l
N
OTE: When both fields are set to 100, each source will be equally mixed and at equal volume.
Audio Input: Specify if you wish to use the Line or Mic audio input
l
T
IP: The Mic input (
N
OTE: For encoders, Remote Audio changes the volume of reverse (bidirectional) audio coming from the
decoder.
51
)is located on the front of the unit and the Line input ( ) is located on the rear.
NGS-D200 User Guide
51