Introduction - KTI Networks KGS-2422 Installation Manual

1. Introduction

The 24-port Managed Gigabit Ethernet Switches are standard L2 switches that meets all IEEE 802.3/u/x/z
Gigabit, Fast Ethernet specifications. The switches provide three 8-port modular slots. Each slot can
accommodate one 8-port module. A variety of modules is available for selection. They include 10/100/1000M
copper module, 100/1000M SFP module, Copper and SFP mixed modules, and Fast Ethernet fiber modules.
Different modules can be installed flexibly in one device rack. The system detects the types of the installed
modules and configures the modules automatically. With variety of modules and flexibility of installation, the
switches can meet most requirements of deployment of fiber networks no matter they are Gigabit Ethernet base,
Fast Ethernet base or even combination of both.
The switches support Telnet CLI, Web GUI, SNMP and console CLI interface for switch stack management.
The network administrator can logon the switch to monitor and configure port operating mode, Quality of
Service, and powerful L2 switching functions such as VLAN, IGMP, RSTP etc. In addition, the switches are
also featured with powerful security functions such as SSH, HTTPS, IEEE 802.1x & MAC-based
authentication, and ACL control to make them suitable for office core applications.
The following figure illustrates the switch has 3 empty slots with no module installed.
Model Definition
Model No.
KGS-2422-S AC powered model
KGS-2422-D DC powered model
Model
AC 100 ~ 240V
Power Input
DC +48V
-5-
Power connector
IEC320
Screw terminals