Advertisement
10-amp Charging Profile
Table provides the specific charging parameters for the 10 Charging
Profile.
Parameter Name
Charger Setting
Maximum Bypass Current
Bulk Mode
Absorption Mode
Float Mode
Switches from Absorption to
Float Mode
Switches from Float Mode
back to Bulk Mode within the
8-hour limit, if the Float
current increases to 6 A.
Standby Mode (Off Mode)
Estimated charging time
0-amp Charging Profile
When Charger Setting 0 A is selected, the Battery Charger is disabled and
will not charge the batteries. Use this mode if other DC charging sources
are available or if it is necessary to temporarily disconnect the AC
charging system.
Specifications
10-amp Charging Profile
Default Value
10 A
1200 W (10 A)
10 A
14.2 Vdc (4 hours maximum)
13.7 Vdc (8 hours)
4 A
6 A
12.5 Vdc
32 hours based on a single battery box with
two 100 Ah, 12 Vdc batteries and no other DC
charging sources
66
Advertisement
