Advertisement
Assembling the Components
Important:
12 inches (15.2 to 30.5 cm) clearance behind both the inverter and the Battery
Box(es). Additional room may be needed for access.
Inverter Side View
2. Loosen these screws just
enough to allow the keyhole slots
on the side of the battery Box to
slip over the top of them. Do NOT
remove these screws completely.
Preparing the Components for Assembly
Installation
Ensure that the location chosen for the inverter allows 8 to
1. Decide on which side of the inverter box
the Battery Box will be placed and locate the
four #6-32 mounting screws on that side(s) of
the inverter. These screws can be identified
by the small ring of bare metal around them.
33
Mounting Screw
Bare Metal
Continued in Figure
.
Advertisement
