Replacing the Top Cover
1. Place the top cover back on
the inverter and align the holes.
2. Replace the 5 #6-32 Phillips
screws on the top of the
inverter.
3. Torque to 1.3 nm (11.5 in-lbs)
Replacing the Top Cover on the Inverter
Double-check
Before applying power, double-check the following connections.
❐ Are the batteries cabled properly? No reverse polarity!
❐ Battery Box to Inverter Connections - Are the Anderson connectors
❐ Are the solar panels wired properly?
❐ Are the wind generators cabled properly?
❐ Are the appropriate disconnects, circuit breakers, etc. in place?
❐ Is all the wiring and cabling in undamaged condition?
Installation
securely in place?
50