Advertisement
If hardwired......
To Power Up the PowerHub 1800:
2
Connect the DC Input
Apply DC Input power by closing
the DC Disconnect Input Breaker
or disconnect from the
Renewable Energy inputs.
6
Connect the Loads
Power Up Procedure for Hardwired Installations
Installation
Connect the AC Input
3
Main Panel
Apply Utility power (if available)
from the Main AC Distribution
Panel by closing the Main AC
Input Circuit Breaker.
Open Inverter
5
Output breaker.
Sub-Panel
Apply power to the AC outlets
by close the AC output breaker
in the AC Distribution Panel to
the connected outlets.
54
Connect the Battery
1
Box(es) to the Inverter
4
Press ON/OFF
Switch to turn ON
Inverter/Charger
Connect the Loads
6
Advertisement
