AC Input and Output Wiring from the Utility Grid
Torque Neutral and Line
terminals to 1.3 nm (11.5 in-lbs)
Torque Ground terminal
to 1.8 nm (16.0 in-lbs)
Connecting the AC Input and Output from the Utility
Installation
Connect the PowerHub to
a 15 A circuit breaker in the
Main AC Distribution
Panel.
Connect the PowerHub to
a 15 A circuit breaker in the
AC Distribution Panel. This
AC Distribution Panel may
not be fed with any other
AC sources.
Torque Neutral and Line
terminals to 1.3 nm (11.5 in-lbs)
Torque Ground terminal
to 1.8 nm (16.0 in-lbs)
46