Advertisement
If hardwired......
To Power Down the PowerHub 1800:
WARNING: Shock Hazard
If no DC Disconnect is used, then the DC input generators (solar Panels or wind
turbines) will have to be physically disconnected to ensure power is OFF.
1
Disconnect any loads directly
connected to the front panel of
the PowerHub
3
Press ON/OFF
Switch to turn OFF
Inverter/Charger
5
Disconnect the Utility
power by opening the AC
input circuit breaker in the
main panel.
Power Down Procedure for Hardwired Installations
Installation
2
Disconnect Loads connected to
the PowerHub through AC
Distribution Panel (Sub-panel)
by opening the Inverter Output
Circuit Breaker.
Disconnect the Battery Box(es)
6
from the Inverter
56
4
Disconnect the
DC Input.(s)
Advertisement
