Advertisement
Continued from Figure
3. Locate the four keyhole
shaped slots on the side of
the battery box that is to be
attached to the inverter.
5. Secure the Battery Box to
the Inverter box by tightening
the mounting screws.
Torque to 1.3 nm (11.5 in-lb).
Important:
Attaching the battery box(es)
to the inverter grounds the chassis' of the two
components and is required, not optional.
Connecting the Battery Box to the Inverter
Installation
.
34
Battery Box Side View
4. Align the Battery Box keyhole
slots with the mounting screws on
the inverter box. Place the keyhole
slots over the screws and lower into
place, so that the head of the screw
interlocks with the top of the keyhole
slot inside the Battery Box.
Also ensure that the washers on the
mounting screws end up on the
inside of the battery box and not
between the battery box and the
inverter.
Advertisement
