Advertisement
Applications
The PowerHub 1800 can be used for the following entry-level
applications.
Softwired Generator Applications (Plug-and-go)
The PowerHub 1800 comes assembled with an AC input cord. This AC
cord can be plugged into a 120 Vac outlet on a generator to charge the
batteries.
Important:
generators in non-permanent installations. For fixed permanent installations,
Xantrex recommends using electrical code-compliant wiring methods.
Important:
1440 watts, due to the 15 A supplementary protector which protects the circuitry.
AC Generator
Important:
loads cannot exceed 1440 W.
Run-times will depend on the
amp-hour rating of the batteries.
Softwired Utility or Generator Applications
Introduction
The input cord is intended to allow connection to portable
The total amount of output power available to power the loads is
120 Vac Outlet
The combination of
22
AC OUT
Advertisement
