Advertisement
Wiring
Plug-and-go (Softwiring)
The PowerHub 1800 comes assembled with an AC input cord. This AC
cord can be plugged into a 120 Vac outlet on a 120 Vac generator to
charge the batteries.
Important:
generators in non-permanent installations. For fixed permanent installations,
Xantrex recommends using electrical code-compliant wiring methods. See
"Permanent Wiring (Hardwiring)" on page 42 for instructions.
AC Generator
120 Vac
Outlet only
Important:
of loads cannot exceed 1440 W.
Plug-n-Go Wiring (Softwired)
Installation
The input cord is intended to allow connection to portable
The combination
44
Advertisement
