Resetting Ringer Settings; Handset Volume - Siemens optiPoint 410 User Manual

Customizing the Telephone
Step by Step
>
10=Line Specific Ringer? >
!=Reset All?
>
2=Change?
>
3=Reset?
>
05=Handset vol.?
98

Resetting Ringer Settings

In case of a MultiLine telephone you can reset the ring-
er (tone sequence and melody) and volume to the fac-
tory default either individually or for all lines set up.
Prerequisite: You are in the "Audio Settings" menu
page 95.
:
Select and confirm.
For all Lines
:
Confirm. All settings are reset.
>
For a Specific Line
Prerequisite: You have previously selected a setting
different from the factory default for this line.
:
Select and confirm.
>
Press the desired line key. The number or name of the
line and the current setting are displayed.
:
Select and confirm. The setting is reset to the factory
>
default.

Handset Volume

You can adjust the handset volume as follows:
Prerequisite: You are in the "Audio Settings"
page 95.
:
Select and confirm. The current setting is displayed.
>
The value can be increased or reduced by using either
uv
the control keys on the telephone or
<>
the arrow keys or
o e l
to the keypad keys.
:
Confirm the setting. The new setting is displayed as a
>
value.