Repertory Dialing - Siemens optiPoint 410 User Manual

Operating the Telephone with the optiPoint display module
Step by Step
126

Repertory Dialing

With repertory dialing, you can enter dial control func-
tions at any point in the repertory dialing sequence.
Broadsoft automatically detects whether the digits rep-
resent an IP address, a number, or a URL.
Control Action During Dialing
Function
OK Any characters following this control func-
tion are sent immediately after the call has
been answered, and are sent as DTMF .
Pause Waits 3 seconds before sending any char-
acters following this control function.
Consult Establish a consultation call at this point.
Clear Clear the current call at this point.
For information on programming a repdial key see
page 90.