Siemens optiPoint 410 User Manual page 93

Step by Step
>
Continue?
>
2=Shifted keys?
02=Selected dialing?
>
Program destination #? >
>
Program dest. Name?
Change?
>
Continue?
or
:
Select and confirm to keep the existing label.
>
The phone is now ready to dial with this function key in
the programmed level.
If you want to program another key (or key level of the
same key), you can select the level again.
If you are using an optiPoint 410 write the func-
tion that you have assigned to the key on the la-
bel card to identify it
For programming the second level:
:
Confirm. You are prompted to press a key.
>
On the second level, only phone numbers and
names, including repertory dialing can be pro-
grammed.
Press the function key to be programmed (the associat-
ed LED blinks).
:
Confirm.
>
:
Select and confirm.
or
:
Select and confirm.
>
o :
Enter the telephone number or name to be stored and
confirm.
When programming function keys on an optiPoint 420
or optiPoint self labeling key module the electronic
labeling function Label is displayed with the following
prompt:
:
Confirm to adapt the electronic key labeling.
o :
Enter or modify name or number and confirm. The rele-
vant key is labelled automatically.
or
:
Select and confirm to keep the existing label.
>
The phone is now ready to dial with this function key in
the programmed level.
If you want to program another key (or key level of the
same key), you can select the level again.
Customizing the Telephone
page 206.
93