Multiline Functions; Function Selection - Siemens optiPoint 410 User Manual

Multiline Functions

Some functions and features are only available to you if the administrator
configured your telephone to support multiple lines. The following are
some examples of special multiline telephone features:
• Line keys
• Manual hold
• Multiline priority
• Visual indicators for line key status
Most features are common to single-line and multiline telephones,
but some features function in a slightly different manner depending
on the telephone type. In this manual, these differences are de-
scribed in the same section that describes single-line telephone fea-
tures.
If a Broadsoft Server is used, "MultiLine" is also called "Shared Call
Appearance".

Function Selection

A function is selected with the keys
key. The arrow icon (>) in the second line indicates that additional functions
are available. In idle mode, there are no menu options available (no prompt).
At the end of the menu list the
at the beginning of the list the
When you select a function using the
through the call procedure until all parameters have been entered.
Operating the Telephone with the Display
< >
or and confirmed with the
>
key goes to the beginning of the list, and
<
key goes to the end of the list.
:
key, you are led step by step
:
21