Siemens optiPoint 410 User Manual page 79

Step by Step
>
1=Show in overview?
Switch on?
Switch off?
>
2=Position in overview? >
>
3=Show interline state? >
Switch on?
Switch off?
Activate/Deactivate "Show in Overview"
for Multiline Broadsoft
Specify here whether or not the individual line should
be shown in the multiline overview Broadsoft
( page 153).
:
Select and confirm.
>
:
Confirm. The line appears in the overview.
>
or
:
Confirm. Line display is suppressed.
>
The new setting is displayed.
Position of Line in Multiline Overview Display
Module
Specify the position of the selected line in the multiline
overview Broadsoft (
optiPoint 410/420 standard S V6.0).
:
Select and confirm.
o:
Enter the required value for the position and confirm
your entry.
The set position is displayed.
Showing Line Status in Call Information Box
Specify here whether or not the selected line's status
should be shown in a call information box in the Broad-
soft call view (only with optiPoint 410/
420 standard S V6.0).
:
Select and confirm.
:
Confirm. Status is shown when call information box is
>
displayed.
or
:
Confirm. Status is suppressed.
>
The new setting is displayed.
Customizing the Telephone
page 153) (only with
79