Using A Key To Activate/Deactivate Do Not Disturb - Siemens optiPoint 410 User Manual

Step by Step
Do Not Disturb
Do Not Disturb
Do Not Disturb
Operating the Telephone with the Display
Using a Key to Activate/Deactivate Do Not
Disturb
Prerequisite: A function key must be configured (see
page 88).
Press the Do Not Disturb key.
The LED is on.
This setting remains in effect as long as the LED
is on.
If there is an incoming call, the caller hears busy tone.
However, calls for pickup groups will still be put
through.
The Do Not Disturb LED blinks.
To deactivate the function, press the "Do Not Disturb"
key again.
The LED goes out.
Do Not Disturb can also be switched on or off by
pressing the Do Not Disturb key during a call.
51