Ringer - Siemens optiPoint 410 User Manual

Step by Step
Operating the Telephone with the optiPoint display module
Ringer/Call Waiting Tone on the Line when Dialing
Prerequisite: The Show interline state function must
be activated (see
If you are dialing an outgoing call on one line and a call
is incoming on the line not currently visible, a display
similar to the one below appears:
Secretary
Mon 07/03/05 11:34AM
Bill Smith
987654321
Calling...
Jill Hill
You now have the following options:
• Ignore the line that is ringing or on which a call is
waiting and continue operation in call view.
• Press the line view in the "Ringing/Call Waiting"
display to view the incoming call while dialing.
• Press the line box in the "Ringing/Call Waiting"
display to answer the incoming call; this automati-
cally interrupts dialing and the view switches to the
status for the other lines.
page 79)
Manager
169