Siemens optiPoint 410 User Manual page 192

Web Interface
Function Key
Call Recording
Quit
Confirm
1
Tone Sequence
Setting the ringer sequence for incoming calls.
•
•
•
In case of a multiline telephone, this setting can be set individually for each
line. Please note the message shown on the display.
User Password
Password input for the web interface user area.
•
•
•
•
192
Function keys are also available on the second level.
page 180 page 88
Minimum value: 1 (Sequence 1)
Maximum value: 3 (Sequence 3)
Default value: 2
page 184 page 97
Current password: enter currently valid password here.
New password: enter new password here. The new password should
be different from the default "000000".
Confirm new password: confirm new password here.
Default: 000000
page 179 page 84
Explanation
Function key for recording a call, e.g. via EVOip.
Function key for ending calls.
Represents the confirm key "
:
".