Using The Line Keys; Transferring A Call; Transferring Without Consultation - Siemens optiPoint 410 User Manual

Operating the Telephone with the Display
Step by Step
Reconnect?
60101
60101
>
Transfer?
Dial?
28
If the held line is displayed on one or two other
multiline telephones, the double tone is signalled
on all of these telephones.
:
Confirm this option to resume the held call. You may
>
now either initiate a consultation call or terminate the
call.

Using the Line Keys

If you have a multiline telephone, you can use the line
keys to place calls on manual "hold".
Prerequisite: You are in the middle of a call.
Press the key associated with the line that is in use.
• The line key LED blinks.
• The line's LED indicates the hold status on all con-
nected multiline telephones.
• Any user with an appearance of the held line can
press that line key and retrieve the call from hold.
Manual hold cannot be used with a consultation hold or
after a waiting call has been answered.

Transferring a Call

You can transfer your current call to another party with
or without consultation.

Transferring without Consultation

:
Select and confirm.
>
o
Enter the telephone number of the party to whom the
call is to be transferred.
:
Confirm.
>
The call is transferred with the message "Transferring"
and the confirmation "Call transferred" to the second
party. You can now replace the handset or dial a new
number.