Initiating Calls Via Line Overview - Siemens optiPoint 410 User Manual

Operating the Telephone with the optiPoint display module
Step by Step
158

Initiating Calls via Line Overview

Off-hook dialing
In line overview, seize a line by:
• pressing a free line box (
<View Line>
• pressing a free line key on the multiline telephone.
• pressing the Loudspeaker/Headset key
• lifting the handset
The first available line is seized and Call Control appears
as shown in the following figure:
Desk 1
Mon 07/03/05 11:34AM
< Please Dial>
Contacts
On-Hook Dialing
You can dial a number by entering it without:
• pressing a free line box beforehand
• pressing a line key beforehand
• pressing the Loudspeaker/Headset key before-
hand
• lifting the handset beforehand
The first available line in accordance with the line pref-
erences for outgoing calls and Call Control appears as il-
lustrated above.
page 153).
Desk 1
123