Konica Minolta BizHub C360 Service Manual page 55

7. INTERFACE SECTION
B. Rear side (upper)
Notes
• The USB cable is extended up to the USB port at the front side. If the cable is
unplugged from the USB port, therefore, the USB port at the front side is no longer
operational. Use utmost care when unplugging or plugging the cable.
• Sliding the USB port cover will reveal the USB port dedicated to firmware upgrad-
ing.
• The USB port cover is provided with a USB cover sensor that detects that the
cover is opened or closed.
• When the USB cover sensor is blocked, the machine determines that the cover is
closed.
Notes
• For details of "firmware upgrading", see Field Service.
• Be sure to close the USB port cover after the firmware upgrading is completed.
Network port
(standard: dedicated
to network print)
USB port
(standard:
dedicated to local print)
Serial port
(standard: not used)
USB extension cable
(standard: USB extension cable to
the USB board at the front side)
USB extension cable
22
Theory of Operation Ver. 1.0 Jul. 2009
USB port cover
(with open/close detection system)
USB port for service
(standard: dedicated to
firmware upgrading)
A0EDT2C005DA
USB port (standard)
USB port cover
USB port for service
(dedicated to firmware upgrading)
A0EDT2C137DA