Printer Function Error - Toshiba e-STUDIO2820C Service Handbook

[3E30] POP3 login error
Check if the POP3 server login name and password set for this equipment are correct.
[3E40] POP3 Login Type ERROR
Check that the login type (Auto, POP3 or APOP) to the POP3 server is correct.
[3F00] [3F10] [3F20] [3F30] [3F40] File I/O error
These errors occur when the mail data is not transferred properly to the HDD.
Request the sender to retransmit the mail.
Replace the HDD if the error still occurs after retransmission.
6.2.24

Printer function error

[4031] HDD full failure during printing
Reduce the number of pages of the job in error and perform the job again.
Check if the server or local disk has a sufficient space in disk capacity.
[4032] Private-print-only error
Select "Private print", and then perform the printing again.
[4033] Printing data storing limitation error
Select "Normal Print", and then perform the printing again.
[4034] e-Filing storing limitation error
Select "Normal Print", and then perform the printing again.
[4035] Local file storing limitation error
Select "Remote" (SMB/FTP) for the destination of the file to save.
[4036] User authentication error
Perform the authentication or register as a user, and then perform the printing again.
[4040] Not being authorized to perform JOB
Confirm the administrator for the JOB authorization.
[4050] Problem in LDAP server connection or LDAP server authorization settings
Confirm the administrator for the LDAP server connection or LDAP server authorization settings.
[4300] Job execution error due to functional restrictions
USB direct printing cannot be performed because the function is restricted by the self-diagnosis.
Check the self-diagnosis setting.
e-STUDIO2820C/2830C/3520C/3530C/4520C
ERROR CODE AND TROUBLESHOOTING
© 2008 TOSHIBA TEC CORPORATION All rights reserved
6 - 120