Toshiba e-STUDIO2820C Service Handbook page 429

Error number
Time out
S01
(When the download is requested)
Time out
S02
(When the download is written)
Time out
S03
(When the download is finished)
Deletion error
S05
(When the download is written)
Writing error
S06
(When the download is written)
Reception status code abnormality
S08
(When the download is requested)
Reception status code abnormality
S09
(When the download is written)
Reception status code abnormality
S10
(When the download is finished)
S00 Other error
(8) Press the [ON/OFF] button to shut down the equipment, and then remove the USB media.
(9) Perform the initialization of the updating data.
• Press the [ON/OFF] button while simultaneously holding down the [0] and [8] buttons.
• Key in "947", and then press the [START] button.
• Press the [INITIALIZE] button.
[B] Confirmation of the updated data
After the updating is completed, check each data version in the Setting Mode (08) to confirm that the
data were overwritten properly.
P.8-48 "8.4 Confirmation of the updated data"
[C] Adjustment
Perform the adjustment of the equipment.
• Performing Image Quality Control (05-396):
P.3-5 "3.1.3 Performing Image Quality Control"
• Adjustment of Color Registration Control (05-4719):
P.3-7 "3.1.4 Adjustment of Color Registration Control"
• Automatic gamma adjustment <PPC> (05-1642) (using [4][FAX] test pattern):
P.3-30 "3.2.1 Automatic gamma adjustment"
• Automatic gamma adjustment < PRT > (05-1008) (using [70][FAX] test pattern):
P.3-46 "3.3.1 Automatic gamma adjustment"
© 2008 TOSHIBA TEC CORPORATION All rights reserved
Scanner update Error
Error message
8 - 11
Error content
Communication timeout
(When the download is requested)
Communication timeout
(When the download is written)
Communication timeout
(When the download is finished)
Deletion error
(When the download is written)
Writing error
(When the download is written)
Reception status code abnormality
(When the download is requested)
Reception status code abnormality
(When the download is written)
Reception status code abnormality
(When the download is finished)
Other error
e-STUDIO2820C/2830C/3520C/3530C/4520C
FIRMWARE UPDATING
8