7.2.3
Precautions and procedures when replacing the HDD
Notes:
•
When the HDD is replaced, it is necessary to back up the data in the HDD before replacing
and to recover them after replacing.
•
To maintain the security, ask users to perform the backup/restore for users' data/information
in the HDD. The service technician can perform them only when users permit it.
•
Some data in the HDD cannot be backed up and can be kept only on the paper.
•
When 08-690 is performed, the HDD self-certificate is not available, so the SSL-related set-
ting becomes disabled.
A procedure for replacing the HDD is shown below.
e-STUDIO2820C/2830C/3520C/3530C/4520C
REPLACEMENT OF PC BOARDS/HDD
[A] Back up data in HDD
[B] Print out "FUNCTION LIST FOR MAINTENANCE"
[C] Print out "function list"
[D] Erase HDD
[E] Replace/Format HDD
[F] Reset user's setting item and restore data/information
[G] Reset "FUNCTION LIST FOR MAINTENANCE"
[H] Reset "function list"
Setting completed
Fig. 7-32
Start
© 2008 TOSHIBA TEC CORPORATION All rights reserved
7 - 16