Operational Screen - Toshiba e-STUDIO2820C Service Handbook

5.3.3

Operational screen

The description of the display (including the function of each button) on the LCD screen is shown
below.
1. Main screen
1
2 3
Displaying of the main unit name
1
Back to the PM support mode activation screen
2
Moving to the clear screen to clear the selected unit counters
3
(parts) counters belonging to that unit When the unit is not selected, all counters are cleared.
Moving to the sub screen of the selected unit
4
Moving to the next/previous page
5
Displaying of the present number of print / develop pages
6
When there are differences among the sub units (parts), "_" is displayed and "CHECK SUB-
UNIT" is displayed at the top
"*" is displayed next to the present number when the number of print / develop pages has
exceeded its PM standard number.
Displaying of the standard number of print / develop pages to replace the unit parts
7
Displaying of the present drive counts
8
"*" is displayed next to the present number when the number of drive counts has exceeded its
PM standard number.
Displaying of the standard number of drive counts to replace the unit parts
9
Displaying of the number of print / develop pages (Page/D. cnt), drive counts (Cnt.) and previ-
10
ous replacement date (Chg.) for a chosen unit
When the replacement date for the sub unit is different, press the [SUB UNIT] button to move
to the sub screen and see each information, otherwise information is not displayed
© 2008 TOSHIBA TEC CORPORATION All rights reserved
10
6
5
4
Fig. 5-3
5 - 3
7 8 9
and , including all sub unit
6 8
e-STUDIO2820C/2830C/3520C/3530C/4520C
PREVENTIVE MAINTENANCE (PM)
5