Table of Contents
Advertisement
5 – Program and cue playback
Importing cue lists
1.
Insert a CF card containing a cue list into the CF card slot.
Press the MENU button to open the
2.
3.
Open the
menu screen
PROGRAM/CUE
4.
Select
.
CUE LIST IMPORT
Press the DATA dial and a confirmation pop-up message
5.
appears.
6.
Press the DATA dial again to start importing the cue list.
7.
When the cue list has finished importing, the pop-up
disappears and the
PROGRAM/CUE
8.
Press the HOME button to return to the Home Screen.
Exporting cue lists
1.
Insert the CF card where the cue list will exported into the
CF card slot.
2.
Press the MENU button to open the
3.
Open the
menu screen.
PROGRAM/CUE
4.
Select
.
CUE LIST EXPORT
5.
Press the DATA dial and a confirmation pop-up message
appears.
Press the DATA dial again to start exporting the cue list.
6.
7.
When the cue list has finished exporting, the pop-up
disappears, and the
PROGRAM/CUE
8.
Press the HOME button to return to the Home Screen.
34
TASCAM CD-9010CF
screen.
MENU
menu screen reopens.
screen.
MENU
menu screen reopens.
Automatic cue point loading options
Usually when a disc for which cue points have already been
saved is loaded, the previous cue points are automatically loaded.
Sometimes, though, you might not want to use the memorized
cue points.
You can set whether or not memorized cue points are automati-
cally loaded.
1.
Press the MENU button to open the MENU screen.
2.
Open the
menu screen.
PROGRAM/CUE
3.
Select
.
CUE POINT LOAD
4.
Press the DATA dial to move the cursor to the right and
select the setting.
5.
Turn the DATA dial to change the setting for memorized
cue point loading.
•
(default): Automatically load previously
LOAD
memorized cue points
•
: Do not load memorized cue points
UNLOAD
•
: Every time the power is turned ON, a pop-up
SELECT
menu appears that lets you decide whether or not to
load cue points. The setting you select stays active until
the power is turned OFF again.
Pop-up that appears when set to
6.
Press the DATA dial again to set the cue list load setting,
and return to the
PROGRAM/CUE
7.
Press the HOME button to return to the Home Screen.
NOTE
When set to UNLOAD (or when set to SELECT and you chose not
to load cue points), the unit will function as follows.
•
New cue points that are added will not be saved.
•
When the active device is changed, all cue points will be
cleared.
•
When the setting is changed from UNLOAD to LOAD (and
vice versa), the change will become effective the next time
the unit is turned ON again. (The cue list will not be loaded
immediately when set to LOAD.)
•
When set to UNLOAD, exporting the cue points will not
export the recently added ones. (It will export the points
added when last set to LOAD.)
SELECT
menu screen.
Advertisement
Table of Contents
