Message Lists; Operation Messages; Warning Messages; Error Messages - Tascam CD-200 Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS
5 − Message Lists

Operation messages

The following messages are shown on the main display according to the operation of the CD player.
Message
Message
lit or blinking
Lit
-CLEAR-
Lit
CLOSE
Lit
NO DISC
Lit
NO FILES
Lit
NO NAME
Lit
NO TITLE
Lit
OPEN
Lit
TOC READ

Warning messages

If an operation cannot be completed, one of the following messages is shown. It will appear for about two seconds before
disappearing automatically.
Message
Message
lit or blinking
Lit
NO PGM
Lit
PGM FULL

Error messages

If one of the following error messages is shown, please refer to the Response column and try to resolve it. If this does not cor-
rect the problem, please contact a TEAC repair center.
Message
Message
lit or blinking
Blinking
COMM ERR
Lit
COMM ERR
Lit
DEC ERR
Lit
DISC ERR
Lit
DRV ERR
Lit
READ ERR
6 − Troubleshooting
Meaning
All programs have been cleared.
The disc tray is closing.
There is no disc or the disc cannot be
verified.
The disc has no files that can be played
back.
There is no artist data or no file data that
can be displayed
There is no title data that can be displayed.
The disc tray is open.
TOC information is being read.
Meaning
No program has been created.
You cannot add more than 99 tracks to the
program.
Meaning
Cannot communicate with the CD drive.
An error occurred during communication
with the CD drive.
The file type is not supported or otherwise
could not be played
The TOC or file system could not be read,
or focus adjustment was not possible.
The CD drive hardware is broken.
The track cannot be accessed.
Response
Load a disc that has MP3 or WAV
files.
Text information must be 7-bit ASCII
compatible text to be displayed.
Text information must be 7-bit ASCII
compatible text to be displayed.
Response
Add tracks to the program.
Either stop trying to add to the
program, clear the program, or
replace one of the tracks in the
program.
Response
Contact a TEAC repair center.
Contact a TEAC repair center.
Change the disc
Clean or change the disc.
Contact a TEAC repair center.
Clean or change the disc.
TASCAM CD-200
23