Editing Cue Point Names; Editing Text - Tascam CD-9010CF Owner's Manual

Editing cue point names

1. Press the MENU button to open the
2. Open the menu screen
PROGRAM/CUE
3. Select .
CUE LIST EDIT
Press the DATA dial to open the
4.
Turn the DATA dial to select the cue point with the name
5.
to be edited, and press the DATA dial to open the
menu.
6. Turn the DATA dial to select
Press the DATA dial to open the
7.
8. Edit the cue point name. See "Editing text" below for
instructions
9. When you are done editing the name, press the BROWSE
button to confirm the name change and return to the
list screen.
NOTE
•
Names containing characters other than the letters of the
alphabet, numbers and symbols cannot be edited.
•
The following symbols and punctuation marks cannot be
used in names.
¥ /: ;, * ? " < > |
•
Cue point names can be up to six single-byte characters in
length.
•
You can connect a USB computer keyboard to the
KEYBOARD connector on the rear panel of the unit and use it
to edit text. (See "9 – Operation using a computer keyboard"
on page 47.)
screen.
MENU
screen.
CUE
CUE
.
EDIT CUE TITLE
screen.
EDIT CUE TITLE
CUE
5 – Program and cue playback

Editing text

Edit text using the following operations.
To move the editing (cursor) position
Use the SEARCH m/, buttons.
To change the character at the cursor position
Turn the DATA dial.
To confirm the character at the cursor position
Press the DATA dial.
To insert an empty space
Press the TRACK / button.
To delete a character
Press the TRACK . button.
To confirm and end editing
Press the BROWSE button.
33
TASCAM CD-9010CF