Turning the power ON and OFF
Press the POWER switch on the rear panel to turn the power ON.
Startup screen
Home Screen
The unit starts and the startup screen appears.
If no media has been loaded in the current device, the screen
shows
.
NO MEDIA
If media has been loaded in the current device, the screen
shows
while the unit reads the media. When this
MEDIA READING
process is complete, the Home Screen is displayed.
Turning the power OFF
Press the POWER switch to turn the power OFF. No special
shutdown procedures are necessary.
CAUTION
Do not turn the power OFF when the unit is in use (recording,
playing back, writing data to a CF card, etc.). Doing so could
cause data transfers to fail, corruption of data, sudden loud
noise to be emitted from monitoring equipment, damage to
equipment and harm to hearing.
3 – Preparations
Setting the date and time
The internal clock is used to add the date and time to files ripped
to CF cards.
1.
Press the MENU button to open the
2.
The
menu screen appears.
SYSTEM
3.
Select
.
CLOCK ADJUST
4.
Press the DATA dial to open the
5.
Follow these procedures to change the date and time.
•
Press the
DATA dial to cycle through the year, month
and date and select the item to set.
•
DATA dial to change the selected item.
Turn the
6.
After completing the setting, press the DATA dial to
confirm the set date and time and return to the
menu screen.
7.
Press the HOME button to return to the Home Screen.
screen.
MENU
screen.
CLOCK ADJUST
SYSTEM
17
TASCAM CD-9010CF