About Discs; Handling Of Compact Discs - Tascam CD-9010CF Owner's Manual

Cd/solid state player
Table of Contents

Advertisement

About discs

In addition to commercially-available music CDs, this unit can
play CD-R discs that have been recorded in audio CD (CD-DA)
format, as well as CD-R discs that have WAV audio files recorded
on them. It can also playback 8cm discs.

Handling of compact discs

Always load compact discs with their labels facing upward.
To remove a disc from its case, press down on the center of
the disc holder, then lift the disc out, holding it carefully by
the edges.
Do not touch the signal side (the unlabeled side).
Fingerprints, oils and other substances can cause errors
during playback.
To clean the signal side of a disc, wipe gently with a soft dry
cloth from the center towards the outside edge.
Dirt on discs can lower the sound quality, so clean them and
always store them in a clean state.
Do not use any record spray, anti-static solutions, benzene,
paint thinner or other chemical agents to clean CDs as they
could damage the delicate playing surface. It may cause
CDs to become unplayable.
Do not apply labels or other materials to discs. Do not use
discs that have had tape, stickers or other materials applied
to their surface. Do not use discs that have sticky residue
from stickers, etc. Such discs could become stuck in the unit
or cause it to malfunction.
Never use a commercially available CD stabilizer. Using
stabilizers with this player will damage the mechanism and
cause it to malfunction.
Do not use cracked discs.
Only use circular compact discs. Avoid using non-circular
promotional discs, etc.
Music discs with copy control, a copy-protection system,
have been released form several record companies in an
attempt to protect the copyright. Since some of these discs
do not comply with the CD specifications, they may not be
playable on the unit.
1 – Introduction
TASCAM CD-9010CF
9

Advertisement

Table of Contents
loading

Table of Contents