Table of Contents
Advertisement
Thank you very much for purchasing a TASCAM CD-9010CF CD/
Solid State Player.
Please read this manual thoroughly before using the unit so that
you understand correct operating procedures and can use its
functions fully. We hope that you enjoy using this unit for many
years.
Please keep this manual so that you can refer to it at any time.
A digital copy of this manual can also be downloaded from our
website (http://tascam.com/).
Features
This professional CD player is designed for a variety of uses,
including broadcasting, postproduction and installation applica-
tions. Here are some of its features.
•
In addition to commercially-available audio CDs, CD-DA
format audio CDs and CD-R discs with WAV format files
(except unfinalized data CDs) can be played back
•
44.1/48kHz linear PCM audio (WAV format) files on CF cards
can be played back (Maximum file size is 2GB)
•
Analog inputs:
MIX INPUTS stereo pair (signal can mixed
with the CD/CF playback signal or passed through as is to
the LINE OUTPUTS)
•
Analog outputs:
LINE OUTPUTS stereo pair, MONITOR
OUTPUTS stereo pair and stereo PHONES monitoring
output
•
Digital output: 1 stereo output with sample rate conversion
•
Playback signals of the two playback modes—online
playback for live/on-air use and monitoring playback for
confirmation/rehearsal use—can be output from different
connectors
•
Auto cue function enables standby at the point when audio
begins in a track
•
Auto ready function enables automatic standby at the
beginning of the next track after one track completes
playback
•
JOG
dial enables searching one frame at a time
•
Searching by index is possible
•
Fail safe function prevents misoperation during critical
playback situations
•
Synchronization with external word clock (44.1 or 48 kHz) is
possible and the CD playback signal can be output digitally
with a 48kHz sampling frequency when synchronized with
48kHz external clock
•
±12.5% pitch control function
•
Connect a TASCAM RC-9010/RC-9010S remote control (sold
separately) to enhance operation and increase functionality
•
End check function allows playback of the ends of tracks
•
Up to 9 cue points can be remembered for each disc
•
Manual eject mechanism allows CDs to be removed even
when the power is off
1 – Introduction
Included items
This product includes the following items.
Take care when opening the package not to damage the items.
Keep the packing materials for transportation in the future.
Please contact TASCAM if any of these items are missing or have
been damaged during transportation.
•
Main unit
................................................................................................. 1
•
Power cord
.............................................................................................. 1
•
Security device
...................................................................................... 1
•
Warranty card
........................................................................................ 1
•
Owner's Manual (this manual)
Conventions used in this manual
In this manual, we use the following conventions:
•
When instructed to select an item, use the controls so that
item appears to be light letters on a dark background.
•
Buttons, connectors and other parts of the unit and external
devices are indicated like this: STOP
•
Messages on the unit's display are shown like this:
•
CD-DA format discs are sometimes called "audio CDs"
•
A CD with WAV files is sometimes called a "data CD"
•
"CompactFlash card" is abbreviated as "CF card"
•
The device that is currently selected (CD or CF card) is called
the "current device".
•
Additional information is provided as necessary as tips,
notes and cautions.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special
cases.
CAUTION
Failure to follow these instructions could result in injury, damage
to equipment or lost recording data, for example.
......................................................... 1
MENU
7
TASCAM CD-9010CF
Advertisement
Table of Contents
